Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.7-STABLE #13: Mon Feb  3 13:44:54 PST 2003
    dillon@apollo.backplane.com:/FreeBSD/FreeBSD-4.x/src/sys/compile/EPIA5000
Timecounter "i8254"  frequency 1193182 Hz
CPU: VIA/IDT Unknown (932.89-MHz 686-class CPU)
  Origin = "CentaurHauls"  Id = 0x689  Stepping = 9
  Features=0x803035<FPU,DE,TSC,MSR,MTRR,PGE,MMX>
real memory  = 503250944 (491456K bytes)
avail memory = 485564416 (474184K bytes)
Preloaded elf kernel "kernel" at 0xc03f3000.
md0: Malloc disk
Using $PIR table, 5 entries at 0xc00fded0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1106 device=b091)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <VGA-compatible display device> at 0.0 irq 11
pci0: <unknown card> (vendor=0x1106, dev=0x3044) at 13.0 irq 5
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 11 at device 16.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 5 at device 16.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 10 at device 16.2 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <USB controller> at 16.3 irq 11
isab0: <PCI to ISA bridge (vendor=1106 device=3177)> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 ATA133 controller> port 0xe000-0xe00f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcm0: <VIA VT8235> port 0xe400-0xe4ff irq 10 at device 17.5 on pci0
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe800-0xe8ff mem 0xde002000-0xde0020ff irq 11 at device 18.0 on pci0
vr0: Ethernet address: 00:40:63:c5:5c:09
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROM> at iomem 0xd0000-0xd9fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
DUMMYNET initialized (011031)
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging disabled
IP Filter: v3.4.29 initialized.  Default = pass all, Logging = disabled
ad0: 117246MB <Maxtor 6Y120P0> [238216/16/63] at ata0-master UDMA133
Sending DHCP Discover packet from interface vr0 (00:40:63:c5:5c:09)
Received DHCP Offer packet on vr0 from 216.240.41.2 (accepted) (no root path)
Sending DHCP Request packet from interface vr0 (00:40:63:c5:5c:09)
Received DHCP Ack packet on vr0 from 216.240.41.2 (accepted) (got root path)
vr0 at 216.240.41.56 server 216.240.41.2 server name apollo.backplane.com boot file pxeboot
subnet mask 255.255.255.192 router 216.240.41.15 rootfs 216.240.41.2:/ 
Adjusted interface vr0
Mounting root from ufs:/dev/ad0s1a
fwohci0: <VIA VT6306> port 0xd000-0xd07f mem 0xde000000-0xde0007ff irq 5 at device 13.0 on pci0
fwohci0: PCI bus latency was changing to 250.
cache size 8.
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: resetting OHCI...done (0)
fwohci0: BUS_OPT 0xf800a202 -> 0xf800a202
fwohci0: Link 1394a available S400, 2 ports, maxrec 2048 bytes.
fwohci0: Enable 1394a Enhancements
fwohci0: EUI64 00:40:63:00:00:02:88:6d
fwochi_set_intr: 1
firewire0: <IEEE1394(Firewire) bus> on fwohci0
firewire0: firewire bus attach
firewire0: BUS reset
firewire0: node_id = 0xc800ffc0, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fw_set_bus_manager: 63->0 (loop=0)
send phy_config root_node=-1 gap_count=1
start AT DMA status=0
bus_explore done
sbp_identify
sbp_probe
sbp0: <SBP2/SCSI over firewire> on firewire0
sbp_attach